Star Products
Toyo Corporation E4990A-120K High Frequency Impedance Analyzer
July 14, 2021 - This system provides the highest accuracy internal resistance measurement environment for solid-state electrolyte activation energy calculations to date. A must for many of Japan's top solid-state electrolyte materials research institutions...
Spectroscopy SiC epitaxial phase surface phase non-destructive defect analysis
July 04, 2023 - The low spatial resolution of microwave detection at the mm level does not allow for accurate distribution imaging of carrier lifetime. With the new transient absorption spectroscopy imaging technology, the imaging of carrier decay dynamics is achieved using a high-speed camera without scanning the sample! Significant increase in detection speed...
Toyo Technica FCE10 Ferroelectric Material Test System
July 14, 2021 - Evaluation system for various ferroelectric, pyroelectric and dielectric materials. New VG architecture and QV/IV dual sensor design enable accurate detection of small charge changes in thin film or nanoparticle materials, etc...
All Products - Material Analysis
Anhui Core PALS Positron Annihilation Lifetime Spectrometer
July 14, 2021 - Positron annihilation techniques are extremely sensitive to structural phase transitions and atomic-scale defects in materials. As a microscopic analysis technique, the main scope of positron annihilation research lies in microstructures and defects targeting atomic size...
Time-Tech Spectra mFemto-UM100 Ultrafast Transient Reflection Microscope System
July 14, 2021 - This system combines a microscope and a femtosecond laser for the detection of photoexcited transient absorption spectra, kinetic processes, and imaging of transient absorption spectra of micro and nano samples. The system has both ultrafast time resolution (femtosecond) and spatial resolution of <1um...
Time-Tech Spectra Ultra-Fast Transient Absorption Spectroscopy System
July 14, 2021 - Time-resolved transient spectroscopy can be used to study the evolution of quantum states and dynamical processes such as interactions between states. Such as various dynamic processes occurring in surfaces, solutions, polymers, optoelectronic materials and life sciences...
Toyo Technica FCE10 Ferroelectric Material Test System
July 14, 2021 - Evaluation system for various ferroelectric, pyroelectric and dielectric materials. New VG architecture and QV/IV dual sensor design enable accurate detection of small charge changes in thin film or nanoparticle materials, etc...
Toyo Corporation E4990A-120K High Frequency Impedance Analyzer
July 14, 2021 - This system provides the highest accuracy internal resistance measurement environment for solid-state electrolyte activation energy calculations to date. A must for many of Japan's top solid-state electrolyte materials research institutions...
Toyo Corporation MIA-5M Material Impedance Analyzer
July 14, 2021 - AC impedance evaluation system for various dielectric materials. The system is equipped with an exclusive OSL compensation system to achieve a measurement error accuracy of up to 0.2%...
Lasertec ECCS B310/B320 Confocal System for Electrochemical Reaction Visualization
July 14, 2021 - The only means of in-situ real-time observation of battery electrochemistry. It can realize the observation and quantification of the distribution of electrochemical reaction process of lithium battery in charge and discharge state. The best means for battery material and process improvement...
Material Analysis - Japan
WACOM Long Pulse Flicker Multi-Light Source Large Area Solar Simulator
April 4, 2022 - Long-pulse solar simulators have been developed for PV module certification. The enhancement of the light source pulse allows for a wider range of radiation over a large area. The pulse duration can be adjusted from 80 ms to 800 ms for PV module characterization....
Material Testing - Japan
WACOM AM0/AM1.5 Dual Lamp Continuous Sunlight Simulator
April 4, 2022 - Wacom uses a dual lamp source design of xenon and halogen lamps, along with special filters to produce a more natural, optimized artificial light that closely resembles real sunlight. A voltage regulator circuit is used to achieve steady state continuous light source illumination...
Materials Testing - China
Laser scanning fluorescence lifetime (intensity) imaging system for optoelectronic devices
April 9, 2022 - For the study of fluorescence kinetic processes and imaging in micro and nano scales of semiconductor micro and nano scale samples, photoelectric conversion materials, photocatalytic materials and biological samples. Fluorescence lifetime imaging, fluorescence intensity imaging, photocurrent imaging...
Materials Testing - China
Ultrafast fluorescence upconversion spectroscopy system
April 9, 2022 - For the study of ultraviolet, visible and near-infrared spectral regions, solvation kinetics, intramolecular coherence vibrations, ultrafast photoisomerization reaction kinetics, charge transfer reactions, fluorescence properties of DNA nucleosides and nucleotides, solvation reactions at multiple sites in globular proteins, condensed matter...
All Instruments - Sample Preparation
Two-Photon Polymerization I Two-Photon Polymerization 3D Printing System
May 29, 2023 - A two-photon polymerization (2PP) 3D printing system provides ultra-high-precision additive manufacturing technology that achieves nanoscale resolution for the fabrication of complex geometries with micro- and nanostructures....
Formulatrix MANTIS Microplate Automated Dispenser
Feb 12, 2021 - MANTIS® (Green Mantle) Automated Liquid Handling Workstation efficiently and reproducibly dispenses any reagent, regardless of volume, viscosity, temperature, concentration and research experience ......
Formulatrix TEMPEST High Throughput Dispenser
July 14, 2021 - TEMPEST® is a non-contact, multi-purpose dispenser. By utilizing 96 independently controlled outputs, it allows you to dispense up to 12 different reagents simultaneously. Dispense any volume, any reagent into any well...
RESONANT ACOUSTIC® LABRAM I Stirring Mixer
June 06, 2021 - LabRAM I is designed for batch mixing of developmental and repetitive mixtures.With a 1.1 lb (500 g) payload capacity and acceleration of up to 100 g, LabRAM I brings significant power gains to benchtop mixing...